Ask
Unex

DAXA-GO1

high-power 802.11 a/n/ac 5GHz 3x3 PCIe mini card, QCA9880

Features high-power 5GHz 802.11ac 3x3 and external Rx filter, DAXA-GO1 delivers up to 1.3Gbps data rate and provides the excellent radio rejection against the interfering signal from the 2nd Wi-Fi module on dual-band dual con-current applications.


High-power 3-stream, 1.3Gbps data rate.

Max. 23 dB output power Wi-Fi improve range and performance for high-reliable and bandwidth-intensive dual-band, dual-concurrent applications.

Chipsets
QCA9880
Interface
mini-PCIe
Standard
802.11ac, 802.11n, 802.11a
Spectral Band
5GHz
Peak Speed
1.3Gbps
Channel Utilization
20/40/80MHz.
MIMO Configuration
3x3 (3-stream)
Driver Support
Linux
Performance
High-power,
external PA, LNA, Rx filter.
Radar Co-existence
DFS support.
Dimension
29.85(W) x 60.80(L) mm, standard mPCIe screw mounting hole.
Antenna connector
Three U.FL.
Quality
Optical quality inspection,
100% power calibration.
Environment Friendly
REACH and RoHS compliance.
Pin No. Name Direction Description
4,9,15,18,21,26,27,29,34,35,40,50 GND --- Ground
43 RESERVED --- Ground
37 RESERVED --- No connection
39,41 RESERVED --- 3.3V
49,51 RESERVED I External 4.2V Power Supply for PA
3 RESERVED I/O Reserved for QCA GPIO.
47 RESERVED I/O Reserved for QCA smart antenna control (GPIO2).
45 RESERVED I/O Reserved for QCA smart antenna control (GPIO3)
5 RESERVED I/O Reserved for QCA smart antenna control (GPIO4)
8,10,12,14,16,17,19, NC --- No connection
33 PETp0 Analog input signal Differential receive
31 PETn0 Analog input signal Differential receive
25 PERP0 Analog output signal Differential trnasmit
23 PERN0 Analog output signal Differential trnasmit
13 REFCLK+ Analog input signal Differential reference clock (100MHz)
11 REFCLK- Analog input signal Differential reference clock (100MHz)
20 WLAN_DISABLE_L I/O Reserved for QCA GPIO0
7 CLKREQ_L A digital output signal with open drain Reference clock request, open drain
22 PERST_L Input siganls with weak internal pulldown, to prevent siganls from floating PCI Express reset with weak pull down
1 WAKE_L A digital output signal with open drain Reserved for 3.3V or WAKE2_L (Request to service a fuction-initiated wake event, open drain).
32 SMB_DATA --- No connection
30 SMB_CLK --- No connection
46 LED_WPAN_L O No connection
44 LED_WLAN_L O Reserved for QCA GPIO1
42 LED_WWAN_L --- No connection.
38 USB_D+ I/O USB_D+
36 USB_D- I/O USB_D-
6,28,48 1.5V --- No connection
2,52 3.3V --- 3.3V
24 3.3VAUX --- Reserved for 3.3V
Chipset
QCA9880
Interface
miniPCI-Express 1.2
Standard
802.11a, 802.11n and 802.11ac
MIMO Configuration
3x3 (3-steram)
Spectral Bands
5.15~ 5.85GHz
Learn more
Channel Utilization
20/40/80MHz
Operation Voltage
3.3VDC power supply
4.2VDC power for external PA
Power Consumption (25C, typical, ± 50mA tolerance)
430~807mA
Learn more
Output Power (max. hardware capability)
16~ 23dB, ±2dB tolerance
Learn more
Receiver Sensitivity (3 chains typical)
-69 ~ -95dB, ± 3dB tolerance
Learn more
Operating Channels
5~19 channels
Learn more
Antenna Connector
three U.FL
Driver Support
Linux
Security
WEP, WPA, WPA2, 802.1x
Dimension
29.50 (W) x 60.80(L) mm
Operation Temperature Range
-10°C - +50°C ambient
Storage Temperature Range
-20°C - +80°C
Health & Environment-Friendly
REACH and RoHS

Product Comparison

Explore and Compare Unex’s products
Learn the similarities and differences between models.
Select the best solutions for you.

Select

Download